...
Note that any manual changes made to a Datical-managed environment should ultimately be deployed to all environments in the pipeline. This will allow the pipeline to remain in sync with respect to changes deployed over time.
Solutions
There are three different paths to accomplishing this:
1. No manual changes - fix issues like all other changes
This is applicable when you have the sufficient time window to root cause the issue, script it, commit into SCM, package and deploy into your pipeline just like normal changes/ This means you will always leverage your automation framework.
2. Use a "hotfix" process to package changes and deploy directly to STAGE and PROD.
This allows you to bypass deploying into your DEV and QA environments and hotfix changesets can be deployed directly to STAGE and PROD. You will be responsible for eventually deploying your hotfix changes back into DEV and QA environments, typically performed after hotfix changes have released to PROD.
3. An emergency fix is necessary
You only have a small time window to fix the PROD database. In this case, you will root cause your issues, test your fix in STAGE and once validated, deploy to PROD.
Start by capturing the hotfix in a SQL script. Commit the script into SCM so that it can be packaged, converted into a changeset and deployed (i.e., backfilled) into all other environments. Since PROD environment already contains the change, there is no need to deploy the changeset there. Instead, you will use Datical's "Change Log Sync" feature to mark the hotfix changeset as EXECUTED in PROD environment. This will create an entry in PROD's tracking table (DATABASECHANGELOG) and the audit database. This results in Datical becoming aware that the change from hotfix changeset already exists in PROD.
Step-by-step guide
For the purpose of the document, we will assume that the Datical project has the following pipeline (see table below). The emergency fix is captured in the script called "hotfix_aug.sql". Changes from this script have been manually executed in STAGE and PROD environments. We now need to package this script so that it can be deployed to REF1, DEV and QA environments.
...
REF1 | DEV | QA | STAGE | PROD | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hotfix_aug.sql |
|
|
|
|
| ||||||||||||||||||||||||||
| label used for release | release/1.0.0 | ||||||||||||||||||||||||||||||
| label used to hotfix | hotfix/1.0.0 | ||||||||||||||||||||||||||||||
Package Hotfix Script
Commit your hotfix script in SQL repository. In order for it to obtain the correct hotfix label (e.g., "hotfix/1.0.0"), use the commit message where you can specify the label in square brackets. For example:
...
Deployment Packager will automatically pick up the string inside square brackets and apply it as a label to changesets resulting from scripts that are part of that commit. As a result of running Packager, Datical will generate a new artifact version for you to deploy to your database environments.
Deploy Hotfix Changesets
Resulting changesets can be deployed using the label "hotfix/1.0.0" to DEV and QA environments using your deployment automation framework. You could have a separate process for deploying hotfix changes to STAGE and PROD. Or your deployment automation framework could be designed to automatically detect hotfix changes deploying to STAGE and PROD and choose the "Change Log Sync" method.
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
get status of STAGE before changeLogSync
Defaulting contexts to STAGE from STAGE
Defaulting labels to release/1.0.0 from STAGE
Database: STAGE
Deployed Change Sets
____________________________________________________________________________________________________________________________________________________________________________
| Change Set | Contexts | Labels | DBMS | Reason| Comments |
|===========================================================================================================================================================================|
1. | Temp_Table | | temp_table.sql,release/1.0.0,release/2.0.0 | | New | createTable |
2. | | | | | | tableName=TEMP_TABL |
3. | TAG_q4-2017,createAAA_TESTA1.sql | | release/1.0.0,createaaa_testa1.sql | | New | tagDatabase |
4. | apc1-1 (createTable tableName=AAA_TESTA1) | | release/1.0.0,createaaa_testa1.sql | | New | createTable |
5. | | | | | | tableName=AAA_TESTA |
6. | TAG_q4-2017,createAAA_TESTA2.sql | | release/1.0.0,createaaa_testa2.sql | | New | tagDatabase |
7. | c5cl-1 (createTable tableName=AAA_TESTA2) | | release/1.0.0,createaaa_testa2.sql | | New | createTable |
8. | | | | | | tableName=AAA_TESTA |
9. | sxon-1 (createTable tableName=AAA_TESTA3) | | release/1.0.0,createaaa_testa3.sql | | New | createTable |
10. | | | | | | tableName=AAA_TESTA |
11. | 20170731104511745_Insert_dml_AAA_TESTA3 | | release/1.0.0,insert_dml_aaa_testa3.sql | | New | DDL and DML scripts |
Undeployed Change Sets
NONE
Ignored Change Sets
NONE
Saved status information to AuditDB for project 'PatientPortal'.
Executing changeLogSync for pipeline 'currentRelease'
Defaulting contexts to STAGE from STAGE
Updating AuditDB database for project PatientPortal
Saved status information to AuditDB for project 'PatientPortal'.
changelogSync to 'STAGE' successful. All applicable changesets marked as deployed.
get status of STAGE after changeLogSync
Defaulting contexts to STAGE from STAGE
Defaulting labels to release/1.0.0 from STAGE
Database: STAGE
Deployed Change Sets
____________________________________________________________________________________________________________________________________________________________________________
| Change Set | Contexts | Labels | DBMS | Reason| Comments |
|===========================================================================================================================================================================|
1. | Temp_Table | | temp_table.sql,release/1.0.0,release/2.0.0 | | New | createTable |
2. | | | | | | tableName=TEMP_TABL |
3. | TAG_q4-2017,createAAA_TESTA1.sql | | release/1.0.0,createaaa_testa1.sql | | New | tagDatabase |
4. | apc1-1 (createTable tableName=AAA_TESTA1) | | release/1.0.0,createaaa_testa1.sql | | New | createTable |
5. | | | | | | tableName=AAA_TESTA |
6. | TAG_q4-2017,createAAA_TESTA2.sql | | release/1.0.0,createaaa_testa2.sql | | New | tagDatabase |
7. | c5cl-1 (createTable tableName=AAA_TESTA2) | | release/1.0.0,createaaa_testa2.sql | | New | createTable |
8. | | | | | | tableName=AAA_TESTA |
9. | sxon-1 (createTable tableName=AAA_TESTA3) | | release/1.0.0,createaaa_testa3.sql | | New | createTable |
10. | | | | | | tableName=AAA_TESTA |
11. | 20170731104511745_Insert_dml_AAA_TESTA3 | | release/1.0.0,insert_dml_aaa_testa3.sql | | New | DDL and DML scripts |
12. | hotfix_aug | | hotfix/1.0.0 | | | createTable |
13. | | | | | | tableName=AAA_hotfix |
Undeployed Change Sets
NONE
Ignored Change Sets
NONE
Saved status information to AuditDB for project 'PatientPortal'.
get status of PROD before changeLogSync
Defaulting contexts to PROD from PROD
Defaulting labels to release/1.0.0 from PROD
Database: PROD
Deployed Change Sets
____________________________________________________________________________________________________________________________________________________________________________
| Change Set | Contexts | Labels | DBMS | Reason| Comments |
|===========================================================================================================================================================================|
1. | Temp_Table | | temp_table.sql,release/1.0.0,release/2.0.0 | | New | createTable |
2. | | | | | | tableName=TEMP_TABL |
3. | TAG_q4-2017,createAAA_TESTA1.sql | | release/1.0.0,createaaa_testa1.sql | | New | tagDatabase |
4. | apc1-1 (createTable tableName=AAA_TESTA1) | | release/1.0.0,createaaa_testa1.sql | | New | createTable |
5. | | | | | | tableName=AAA_TESTA |
6. | TAG_q4-2017,createAAA_TESTA2.sql | | release/1.0.0,createaaa_testa2.sql | | New | tagDatabase |
7. | c5cl-1 (createTable tableName=AAA_TESTA2) | | release/1.0.0,createaaa_testa2.sql | | New | createTable |
8. | | | | | | tableName=AAA_TESTA |
9. | sxon-1 (createTable tableName=AAA_TESTA3) | | release/1.0.0,createaaa_testa3.sql | | New | createTable |
10. | | | | | | tableName=AAA_TESTA |
11. | 20170731104511745_Insert_dml_AAA_TESTA3 | | release/1.0.0,insert_dml_aaa_testa3.sql | | New | DDL and DML scripts |
Undeployed Change Sets
NONE
Ignored Change Sets
NONE
Saved status information to AuditDB for project 'PatientPortal'.
Executing changeLogSync for pipeline 'currentRelease'
Defaulting contexts to PROD from PROD
Updating AuditDB database for project PatientPortal
Saved status information to AuditDB for project 'PatientPortal'.
changelogSync to 'PROD' successful. All applicable changesets marked as deployed.
get status of PROD after changeLogSync
Defaulting contexts to PROD from PROD
Defaulting labels to release/1.0.0 from PROD
Database: PROD
Deployed Change Sets
____________________________________________________________________________________________________________________________________________________________________________
| Change Set | Contexts | Labels | DBMS | Reason| Comments |
|===========================================================================================================================================================================|
1. | Temp_Table | | temp_table.sql,release/1.0.0,release/2.0.0 | | New | createTable |
2. | | | | | | tableName=TEMP_TABL |
3. | TAG_q4-2017,createAAA_TESTA1.sql | | release/1.0.0,createaaa_testa1.sql | | New | tagDatabase |
4. | apc1-1 (createTable tableName=AAA_TESTA1) | | release/1.0.0,createaaa_testa1.sql | | New | createTable |
5. | | | | | | tableName=AAA_TESTA |
6. | TAG_q4-2017,createAAA_TESTA2.sql | | release/1.0.0,createaaa_testa2.sql | | New | tagDatabase |
7. | c5cl-1 (createTable tableName=AAA_TESTA2) | | release/1.0.0,createaaa_testa2.sql | | New | createTable |
8. | | | | | | tableName=AAA_TESTA |
9. | sxon-1 (createTable tableName=AAA_TESTA3) | | release/1.0.0,createaaa_testa3.sql | | New | createTable |
10. | | | | | | tableName=AAA_TESTA |
11. | 20170731104511745_Insert_dml_AAA_TESTA3 | | release/1.0.0,insert_dml_aaa_testa3.sql | | New | DDL and DML scripts |
12. | hotfix_aug | | hotfix/1.0.0 | | | createTable |
13. | | | | | | tableName=AAA_hotfix |
Undeployed Change Sets
NONE
Ignored Change Sets
NONE
Saved status information to AuditDB for project 'PatientPortal'. |
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...